How to Customize An Infrared Extender Extension Cable Factory?

Infrared extenders boost remote control signal transmission strength to equipment concealed inside cabinets or facing the incorrect direction. Useful when:

    Kinect lacking to pass-through signals

  • HDMI device control unavailable
  • Cabinet doors obstruct direct sensor access
  • Sunlight interference exists

To Install An IR Extender:

  • Connect the infrared receiver cable to the "IR In" port on the back of the source AV component.
  • Position the attached emitter head directly in front of the target device's IR sensor window.
  • Test remote operation by aiming the controller at the emitter.

Additional Tips:

  • Most 3.5mm stereo extension cables interface with Xbox One.
  • Buy the third party if original devices lack IR extender input.


  • Ensure the emitter aligns perfectly with the IR sensor.
  • Contact manufacturer for system optimization assistance.

To obtain a customized IR extender solution tailored for unique gear setups and specialized use applications, home theater installers can contact dedicated infrared distribution equipment factories in their region. These specialty manufacturers offer custom-tuned systems with optional wide-frequency coverage, extra emitters, extended wiring runs, and more to handle any signal strength requirements.

Why Custom Or Infrared Extender Extension Cable Factory?

Here are some reasons why a custom infrared (IR) extender system from a specialty factory makes sense:

Off-the-Shelf Limitations

Generic IR extension kits feature fixed emitter quantities, frequencies, and cable lengths - lacking the versatility demanded in many custom installations. pre-built systems hit capability ceilings.

Optimized for Specific Equipment

Factories tailor wide-frequency coverage, extra emitters, distances, and accessories suited precisely for the gear models deployed across any sized properties.

Future-proofing Flexibility

Properties change. Custom systems adapt alongside evolving equipment upgrades, floor plan renovations, and usage requirement shifts to maximize lifespan.

Simplifies Complex Configuration

Contracting specialized factories to handle intricacies introduced with larger distribution layouts across challenging construction scenarios prevents installer headaches.

Enhances Aesthetic Options

When gear gets hidden within racks and behind cabinetry per modern preferences, only correctly scoped IR extension facilitates the desired posthumous control outcome.

The Stuart Awards committee seeks someone who:

  • Pushes boundaries in contract furniture use to redefine expectations
  • Leverages innovative, multi-purpose applications as creative solutions
  • Demonstrates a commitment to global community enrichment
  • Advances the lifestyle experience through design focus

People May Ask

How Much Voltage Does An Infrared LED Have?

1.2 VdcThe T-1 ¾ through-hole infrared 5mm LED is a very bright LED with a 20mW maximum brightness. Its drive current is 20mA and its usual forward voltage is 1.2Vdc. The 5mm clear lens has a half angle of 30° when projecting light.

On A Cable Box, Where Is The Infrared Sensor?

Usually located behind a dark plastic panel, the infrared sensor on the box has a cone-shaped shape. If you do not know where it is on your set top box, find it using a flashlight.

Which IR Input Is It?

An electrical connection that transmits and receives data via infrared light is known as an infrared port. These ports were once often utilized by wireless devices to facilitate quick and simple communication with base stations, other equipment, and networked devices.

IR Proximity Sensors: What Are They?

IR, short for infrared, uses an infrared light beam to detect the presence of an object. While infrared radiation is transmitted in place of sound waves, it functions similarly to ultrasonic sensors. An IR LED for emission and a light detector for reflection detection make up an infrared proximity sensor.

What Is The Protocol for IR?

IR is protocol-encoded as a string of pulses and spaces. These protocols can encode commands that tell a device what to do and addresses that tell it how to react. For a given protocol, the values for these aren't always the same amongst devices.

How Can I Inspect My Infrared Emitter?

A visible light source, like a red or infrared LED, on the device can be used to identify an active infrared emitter.Instead,Using an infrared-sensitive camera, like a thermal imaging camera, is an additional method.Instead,To find the infrared light that the device emits, you can alternatively utilize a detector.Instead,Additional things...

Describe What Is Meant by IR Hardware.

An infrared transceiver is a feature that some Android devices have. They are therefore capable of sending and receiving infrared signals, which is what your average TV remote control does. This enables Unified Remote to be used to operate TVs, steros, and other devices. IR is only compatible with specific Android devices.

Describe An Infrared Emitter Diode.

Solid state light sources called Infrared Emitting Diodes (IREDs) emit light in the near-infrared region of the spectrum. The response peak of silicon photodiodes and phototransistors is closely matched to the emission wavelength. A wide variety of lens and power output options are available with this product line.

What's The Difference between RF And IR?

There are two types of energy utilized in remote controllers to send commands: IR, or infrared, and RF, or radio frequency. RF uses radio waves, while infrared light is a type of light that is invisible to the human eye.

How Does An IR Blaster Differ from An IR?

An IR blaster, also called an infrared blaster, on the other hand, is a gadget that uses infrared signals to operate other gadgets, such TVs, set-top boxes, or other home entertainment equipment. An IR blaster is used to emit infrared signals, while an IR sensor is used to receive them.

Custom Ir Infrared Extender Extension Cable Factory Products

Power Cord Extension / 3 Prong Extension Cords, NEMA 5-15P to NEMA 5-15R, Cable Matters 2-Pack 16 AWG Heavy Duty Power Extension Cord, 6 ft, UL Listed 12 inch Molex LP4 Power Extension Cable M/F - 4 pin Molex Power Connector - 4 pin LP4 Power Cable (LP4POWEXT12)

The Fuse Side Winder Mini and Max Headphone and Cable Winder and Organizer is ideal for organizing and traveling with, as it can wrap earbuds and cords. It comes in black.

USB 3.0 Extension Cable by Wingjialei: 2FT Type A Male to Female USB Extension Cable with Multiple USB Ports for Printers, Keyboards, Flash Drives, Hard Drives, Cameras, Game Consoles, and Webcam Projectors

Zer One 16-foot/5-meter Infrared Repeater Extension Cable, Male to Female 3.5mm Stereo Audio Extension Cable for Walkman and Headphones

The USB 3.0 Extension Cable from Wingjialei is 4 feet long and has multiple ports. It is compatible with printers, keyboards, flash drives, hard drives, cameras, PlayStations, and webcam projectors.

Power supply extension cable wire kit featuring Asiahorse 16AWG Pro Power Supply Sleeved Cable 3x8-PORT (6+2), 1x24-PIN/ 2x8-PORT (4+4) M/B Dual EPS Black PCI-E 30cm Length with Combs

IR Receiver Cable -10FT Infrared Remote Control Repeater Extender Cable with 3.5mm Jack Plug IR Emitter for Other STB Set Top Boxes, HD DVR, Cisco Explorer, Verizon FiOS, and Other

The USB-powered system kit, OBVIS IR Infrared Remote Control Extender Repeater Cable (10 Feet), features an IR signal receiver and an IR emitter blaster extension cable wire cord. It is available in black.

Asiahorse Power Supply Wire Kit with Sleeved Cable for Power Supply Extension 3x8-PORT (6+2), 1x24-PIN/ 2x8-PORT (4+4) M/B Double EPS Black-Mix PCI-E 30cm Length with Combs

Top Reviews


Our living room TV stand needed to be childproofed. My audio receiver and TV box were hidden from the TV remote view by sliding cabinet doors, but our child managed to open them, and we didn't want to risk pinching fingers or having equipment pulled out on top of him. fitted a kid safety lock on the door, mounted a single repeater light inside, and placed a sensor near the television. Everything is now hidden and safe and functions perfectly. In all honesty, the control seems to function better now, so I assume that either the repeater emits a brighter IR blast or it is more sensitive to receiving the original signal because, unlike before, when you had to aim precisely, it now appears to function regardless of circumstances. Would buy this again in the event that I needed it!


Performs flawlessly as it should. It took me a few minutes to figure it out, but once I did, I did very great. I only wish there had been instructions.


Worked as advertised. Now my receiver is tucked away in a cabinet.

Hot Search Terms